Home  >>  Home

http // login – Login Steps

In this section, you will read about http // login process. Instructions have been provided below;

  • Make sure your router is connected to the laptop or computer.
  • Open web browser like Google Chrome, Mozilla Firefox, or Microsoft Edge.
  • Enter the Linksys router IP address in the address bar.
  • You can also enter http // setup utility address.
  • Enter the login credentials as given below:
  •    Username – admin
       Linksys smart wifi password – admin or leave blank
  • Click Submit or press Enter.
  • The web browser will now take you to the http // setup.

http // Setup – Basic Hardware Setup

In this section, you will read about http // setup process. Instructions for the Linksys router setup for the physical device are given below.

  • First of all, take out the router and place it near your existing modem.
  • Attach both router & modem to each other with Ethernet cable.
  • Now connect the laptop to your wireless network by either wired or wireless method.
  • After this, attach the power adapter to your router and plug the adapter into the power socket near your modem.
  • Turn on your router and wait for a few seconds.

http // setup utility – Web Configuration

After you are done with settings up the hardware connection, proceed with web configuration;

  • Log into your router through http // login address. The linksyssmartwifi setup address is
  • Now you will see the http // setup utility page.
  • Click on the Linksys setup wizard and then click Start.
  • You will need to establish the internet connection on your WiFi router and then configure the wireless settings.
  • Make sure you follow the on-screen instructions as provided by the Linksys EA6700 setup wizard.
  • Once you are done with the configuration, click Save and let your router reboot.
  • After your router restarts, check whether the internet connection is active on your wireless router.

Linksys smart wifi firmware

For the Linksys smart wifi firmware process, follow the steps given below:

  • Enter the Linsksys router IP in the address bar.
  • Now enter Linksys username and Linksys smart wifi password.
  • Go to the Maintenance section and select Router Upgrade or Firmware.
  • Click the tab, and you will reach the Firmware Window.
  • You will be asked to upload the firmware file to the router’s system.
  • Open another tab in the same browser and visit Linksys firmware official website.
  • Download the latest firmware for your router model and save it on the desktop.
  • Go back to the previous tab and upload the same firmware file.
  • Click Update and wait for a few minutes.
  • After the router reboot run the internet connectivity test.

Linksys smart wifi troubleshooting

We have taken some common issues. In case you face issues other than specified ones, contact us or chat with us.

1. cant setup Linksys router

  • Don’t worry if you can’t setup Linksys router.
  • First of all, check if the router is working well. Ensure the ISP details are correct.
  • Ensure your existing modem is perfectly well.
  • Check for the loose cable connection between modem and router.
  • Restart the both modem and router.
  • Reset the device if the issue is still coming up. After the reset process, attempt to set up again.

2. Linksys smart wifi login problems

  • If you are facing Linksys smart wifi login problems, follow the instructions.
  • Make sure you enter the correct Linksys http // login address and Linksys router IP address.
  • Enter correct Linksys smart wifi password on the Linksys login page.
  • Switch to another browser, which is up-to-date.
  • If still facing the same issue, contact us.

3.Linksys smart wifi can't connect to router

  • Don’t worry if Linksys smart wifi can’t connect to router.
  • Make sure you follow the Linksys router setup process carefully.
  • Make sure you save the settings on your router before leaving the page.
  • Or just contact us and we will help you solve your issue.
  • To reset the device, you can either log into the device and then reset.
  • Or you can just do this manually.
  • Press the Linksys router reset button and hold it for a few seconds.
  • Let the router get back to factory default settings.
  • Reconfigure the device after resetting it.
  • Linksys router reset process erases all the settings and configurations from the wifi router.

error: Content is protected !!